We’re used to having water at the ready. Just turn on the faucet, or shower, or hose, and it spills forth. The mechanical magic barely evokes thought. The water’s just unfailingly there.
So when something disrupts this stability, the shock is serious and urgent. Minimal water pressure in the house? Worse yet, unexpectedly no water in the house? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your West Milwaukee home – kaput, out, dry, nothing coming from any faucet or spigot – very likely you need a new well pump. This pump, occasionally called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps on average operate for 15 to 20 years. Their duration can be shorter or longer, based on the water being pumped and how they’re used. Their well-being often is linked with condition of the pressure tank, as well – replacement of both simultaneously is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in West Milwaukee. Their experienced professionals will analyze your scenario, and have your water up and running within hours.
A well pump isn’t always the culprit of no water in the house. Every now and then an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the first step taken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps quit working for different reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Low water pressure in a West Milwaukee house is a different scenario, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for West Milwaukee homes with high iron content in water.
Otherwise, the problem usually links to the pressure tank. Minimal or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain enough pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the situation only makes it worse, as pricey mechanicals can be damaged or break down entirely.
The proactive decision – whether you have reduced water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water flowing again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud West Milwaukee well pump service professionals!