We’re acclimated to having water readily available. Just turn on the faucet, or shower, or hose, and it comes out. The mechanical magic barely registers. The water’s just reliably there.
So when something interrupts this stability, the shock is undeniable and instantaneous. Diminished water pressure in the house? Worse yet, unexpectedly no water in the home? Yikes. Time to worry.
Maybe yes … or no.
If you have no water pressure in your South Milwaukee house – kaput, out, dry, nothing coming from any faucet or spigot – very likely you need a new well pump. This pump, regularly called a water pump, drives water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps usually operate for 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their health often connects with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.
What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in South Milwaukee. Their skilled professionals will troubleshoot your situation, and have your water restored within hours.
A well pump isn’t always the reason behind no water in the house. Periodically an underground electrical wire breaks – a very fixable issue. Testing power connections is always the initial step taken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps wear out for different reasons. Age is inevitable. Water with high iron content will significantly lessen pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a South Milwaukee home is a different problem, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for South Milwaukee homes with high iron content in water.
Otherwise, the problem usually connects to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain required pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, low water pressure in a home is a headache. It’s a problem that doesn’t just disappear, either. Ignoring the issue only makes it worse, as expensive infrastructure can be damaged or stop working altogether.
The proactive decision – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their professionals will get your water pouring again. It will be right back at your fingertips – exactly as you expect it to be. We are your proud South Milwaukee well pump service professionals!