We’re acclimated to having water at our fingertips. Just start the faucet, or shower, or hose, and it spills forth. The mechanical magic barely evokes thought. The water’s just unfailingly there.
So when something interrupts this continuity, the shock is unmistakable and instantaneous. Minimal water pressure in the home? Worse yet, unexpectedly no water in the house? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Milwaukee home – kaput, out, dry, nothing coming out of any faucet or spigot – probably you need a new well pump. This pump, regularly called a water pump, moves water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps on average last 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their well-being often ties in with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Milwaukee. Their experienced team will diagnose your scenario, and have your water restored within hours.
A well pump isn’t always the source of no water in the house. Sometimes an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the initial step undertaken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps stop operating for myriad reasons. Age is inevitable. Water with high iron content will significantly shorten pump life.
So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Milwaukee house is a different issue, albeit usually less serious. This condition appears in toilets filling slowly, or weak water flows from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for Milwaukee homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain adequate pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s health.
Frankly, low water pressure in a home is a headache. It’s a problem that doesn’t just fix itself, either. Ignoring the situation only makes it worse, as costly infrastructure can be damaged or stop working altogether.
The proactive measure – whether you have low water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their experts will get your water pouring again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Milwaukee well pump service professionals!