We’re used to having water readily available. Just turn on the faucet, or shower, or hose, and it spills forth. The mechanical magic barely evokes thought. The water’s just reliably there.
So when something disrupts this continuity, the shock is undeniable and immediate. Minimal water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your Saylesville house – kaput, out, dry, nothing coming from any faucet or spigot – chances are you need a new well pump. This pump, occasionally called a water pump, moves water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps typically work for 15 to 20 years. Their duration can be shorter or longer, based on the water being pumped and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Saylesville. Their experienced team will analyze your situation, and have your water restored within hours.
A well pump isn’t always the source of no water in the house. Occasionally an underground electrical wire breaks – a very fixable issue. Testing power connections is always the initial step undertaken by Kelly James Service.
If it is a well pump, though … then why? These pumps break down for myriad reasons. Age is unavoidable. Water with high iron content will significantly lessen pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These activities can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Low water pressure in a Saylesville house is a different problem, albeit usually less serious. This condition appears in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem might be a plugged iron filter – again, for Saylesville homes with high iron content in water.
Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain required pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s health.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the situation only makes it worse, as costly mechanicals can be harmed or break down entirely.
The proactive measure – whether you have reduced water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water flowing again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Saylesville well pump service professionals!