We’re used to having water at our fingertips. Just start the faucet, or shower, or hose, and it comes forth. The mechanical part barely registers. The water’s just consistently there.
So when something disrupts this stability, the shock is significant and instantaneous. Decreased water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your Merton house – kaput, out, dry, nothing coming from any faucet or spigot – very likely you need a new well pump. This pump, sometimes called a water pump, moves water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps usually operate for 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their longevity often is linked with condition of the pressure tank, as well – replacement of both simultaneously is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Merton. Their skilled team will diagnose your scenario, and have your water running again within hours.
A well pump isn’t always the reason behind no water in the house. Sometimes an underground electrical wire breaks – a very fixable issue. Checking power connections is always the first step undertaken by Kelly James Service.
If the issue is a well pump, though … then why? These pumps quit working for many reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Merton home is a different situation, albeit usually less serious. This condition appears in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for Merton homes with high iron content in water.
Otherwise, the problem usually links to the pressure tank. Reduced or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain adequate pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, reduced water pressure in a home is a headache. It’s a problem that doesn’t just disappear, either. Ignoring the problem only makes it worse, as pricey infrastructure can be harmed or stop working altogether.
The proactive decision – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their professionals will get your water flowing again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud Merton well pump service professionals!