We’re used to having water instantly available. Just turn on the faucet, or shower, or hose, and it pours forth. The mechanical magic barely registers. The water’s just consistently there.
So when something disrupts this continuity, the shock is serious and urgent. Decreased water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to worry.
Maybe yes … or no.
If you have no water pressure in your Marcy home – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you require a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps on average last 15 to 20 years. Their duration can be shorter or longer, based on the water being pumped and how they’re used. Their health often connects with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Marcy. Their skilled team will diagnose your situation, and have your water back running within hours.
A well pump isn’t always the culprit of no water in the house. Periodically an underground electrical wire breaks – a very repairable issue. Diagnosing power connections is always the initial step taken by Kelly James Service.
If it is a well pump, though … then why? These pumps wear out for various reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Marcy house is a different issue, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a clogged iron filter – again, for Marcy homes with high iron content in water.
Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain sufficient pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s health.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the situation only makes it worse, as expensive mechanicals can be damaged or stop working altogether.
The proactive measure – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their team will get your water pouring again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Marcy well pump service professionals!