Low Water Pressure in your Butler Home?

No Water? Might Need a New Well Pump … Or Something Else

We’re acclimated to having water instantly available. Just start the faucet, or shower, or hose, and it spills forth. The mechanical magic barely registers. The water’s just always there.

So when something disrupts this continuity, the shock is undeniable and urgent. Reduced water pressure in the house? Worse yet, unexpectedly no water in the home? Yikes. Time to freak out.

Maybe yes … or no.

If you have no water pressure in your Butler house – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you need a new well pump. This pump, occasionally called a water pump, moves water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps typically last 15 to 20 years. Their lives can be shorter or longer, based on the water being circulated and how they’re used. Their well-being often connects with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Butler. Their knowledgeable team will troubleshoot your scenario, and have your water running again within hours.

A well pump isn’t always the culprit of no water in the house. Periodically an underground electrical wire breaks – a very repairable issue. Diagnosing power connections is always the first step undertaken by Kelly James Service.

If it is a well pump, though … then why? These pumps quit working for various reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.

So will running water for hours in a row, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.

Low water pressure in a Butler house is a different problem, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a plugged iron filter – again, for Butler homes with high iron content in water.

Otherwise, the problem usually ties to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t maintain required pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s health.

Frankly, minimal water pressure in a home is a headache. It’s a problem that doesn’t just solve itself, either. Ignoring the issue only makes it worse, as costly infrastructure can be damaged or break down entirely.

The proactive decision – whether you have minimal water pressure in a house, or none at all – is to reach out to Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water pouring again. It will be right back at your fingertips – precisely as you expect it to be.  We are your proud Butler well pump service professionals!