Low Water Pressure in your Fillmore Home?

No Water? Might Require a New Well Pump … Or Something Else

We’re used to having water at the ready. Just turn on the faucet, or shower, or hose, and it comes out. The mechanical part barely evokes thought. The water’s just unfailingly there.

So when something disrupts this reliability, the shock is serious and immediate. Decreased water pressure in the home? Worse yet, unexpectedly no water in the house? Yikes. Time to panic.

Maybe yes … or no.

If you have no water pressure in your Fillmore house – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you need a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps typically operate for 15 to 20 years. Their duration can be shorter or longer, depending on the water being circulated and how they’re used. Their health often is linked with condition of the pressure tank, as well – replacement of both simultaneously is a regular occurrence.

What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Fillmore. Their skilled team will diagnose your scenario, and have your water up and running within hours.

A well pump isn’t always the reason behind no water in the house. Occasionally an underground electrical wire breaks – a very repairable issue. Testing power connections is always the initial step taken by Kelly James Service.

If the problem is a well pump, though … then why? These pumps stop working for numerous reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.

So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.

Minimal water pressure in a Fillmore home is a different problem, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water flows from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a plugged iron filter – again, for Fillmore homes with high iron content in water.

Otherwise, the problem usually connects to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, reduced water pressure in a home is a headache. It’s an issue that doesn’t just disappear, either. Ignoring the issue only makes it worse, as expensive mechanicals can be harmed or stop working altogether.

The proactive decision – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water flowing again. It will be once again at your fingertips – precisely as you expect it to be.  We are your proud Fillmore well pump service professionals!