Low Water Pressure in your Cedar Creek Home?

No Water? Might Require a New Well Pump … Or Something Else

We’re used to having water always available. Just turn on the faucet, or shower, or hose, and it pours out. The mechanical part barely registers. The water’s just unfailingly there.

So when something disrupts this reliability, the shock is undeniable and immediate. Minimal water pressure in the house? Worse yet, unexpectedly no water in the home? Yikes. Time to freak out.

Maybe yes … or no.

If you have no water pressure in your Cedar Creek home – kaput, out, dry, nothing coming out of any faucet or spigot – probably you need a new well pump. This pump, frequently called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.

Well pumps usually work for 15 to 20 years. Their lifespan can be shorter or longer, based on the water being circulated and how they’re used. Their health often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Cedar Creek. Their experienced team will troubleshoot your scenario, and have your water running again within hours.

A well pump isn’t always the reason behind no water in the house. Every now and then an underground electrical wire breaks – a very fixable issue. Testing power connections is always the first step undertaken by Kelly James Service.

If it is a well pump, though … then why? These pumps stop operating for different reasons. Age is unavoidable. Water with high iron content will significantly reduce pump life.

So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.

Low water pressure in a Cedar Creek house is a different situation, albeit usually less serious. This condition appears in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem might be a plugged iron filter – again, for Cedar Creek homes with high iron content in water.

Otherwise, the problem usually links to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the issue only makes it worse, as pricey mechanicals can be damaged or quit working altogether.

The proactive decision – whether you have reduced water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water flowing again. It will be right back at your fingertips – exactly as you expect it to be.  We are your proud Cedar Creek well pump service professionals!