Low Water Pressure in your Allenton House?

No Water? Might Need a New Well Pump … Or Something Else

We’re used to having water at our fingertips. Just start the faucet, or shower, or hose, and it comes forth. The mechanical part barely evokes thought. The water’s just unfailingly there.

So when something disrupts this stability, the shock is significant and urgent. Diminished water pressure in the house? Worse yet, unexpectedly no water in the house? Yikes. Time to worry.

Maybe yes … or no.

If you have no water pressure in your Allenton home – kaput, out, dry, nothing coming from any faucet or spigot – probably you require a new well pump. This pump, occasionally called a water pump, drives water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps usually work for 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their well-being often is linked with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Allenton. Their skilled team will analyze your situation, and have your water restored within hours.

A well pump isn’t always the reason behind no water in the house. Periodically an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the initial step taken by Kelly James Service.

If the issue is a well pump, though … then why? These pumps break down for many reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.

So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.

Reduced water pressure in a Allenton house is a different scenario, albeit usually less serious. This condition appears in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem might be a clogged iron filter – again, for Allenton homes with high iron content in water.

Otherwise, the problem usually links to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain adequate pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, low water pressure in a home is a headache. It’s a problem that doesn’t just solve itself, either. Ignoring the problem only makes it worse, as expensive infrastructure can be harmed or break down entirely.

The proactive measure – whether you have low water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water flowing again. It will be right back at your fingertips – exactly as you expect it to be.  We are your proud Allenton well pump service professionals!