Low Water Pressure in your South Beaver Dam Home?

No Water? Might Require a New Well Pump … Or Something Else

We’re used to having water at our fingertips. Just start the faucet, or shower, or hose, and it spills forth. The mechanical magic barely registers. The water’s just always there.

So when something interrupts this continuity, the shock is profound and instantaneous. Minimal water pressure in the house? Worse yet, suddenly no water in the home? Yikes. Time to freak out.

Maybe yes … or no.

If you have no water pressure in your South Beaver Dam house – kaput, out, dry, nothing coming out of any faucet or spigot – in all likelihood you need a new well pump. This pump, regularly called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps on average last 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their well-being often is linked with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in South Beaver Dam. Their skilled team will analyze your situation, and have your water up and running within hours.

A well pump isn’t always the reason behind no water in the house. Occasionally an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the initial step undertaken by Kelly James Service.

If the issue is a well pump, though … then why? These pumps stop working for numerous reasons. Age is unavoidable. Water with high iron content will significantly lessen pump life.

So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.

Low water pressure in a South Beaver Dam home is a different scenario, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a plugged iron filter – again, for South Beaver Dam homes with high iron content in water.

Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain sufficient pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s health.

Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the problem only makes it worse, as costly infrastructure can be damaged or stop working altogether.

The proactive measure – whether you have reduced water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their professionals will get your water flowing again. It will be right back at your fingertips – exactly as you expect it to be.  We are your proud South Beaver Dam well pump service professionals!