We’re acclimated to having water readily available. Just turn on the faucet, or shower, or hose, and it pours out. The mechanical part barely registers. The water’s just dependably there.
So when something interrupts this stability, the shock is unmistakable and urgent. Decreased water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Leipsig house – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you need a new well pump. This pump, often called a water pump, moves water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps usually work for 15 to 20 years. Their lives can be shorter or longer, based on the water being pumped and how they’re used. Their longevity often connects with condition of the pressure tank, as well – replacement of both simultaneously is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Leipsig. Their experienced team will troubleshoot your situation, and have your water restored within hours.
A well pump isn’t always the reason behind no water in the house. Every now and then an underground electrical wire breaks – a very repairable issue. Checking power connections is always the initial step taken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps stop working for various reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Leipsig home is a different issue, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for Leipsig homes with high iron content in water.
Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t maintain required pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, minimal water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the situation only makes it worse, as costly mechanicals can be harmed or break down entirely.
The proactive measure – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their professionals will get your water flowing again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud Leipsig well pump service professionals!