We’re used to having water instantly available. Just start the faucet, or shower, or hose, and it pours forth. The mechanical magic barely evokes thought. The water’s just reliably there.
So when something disrupts this stability, the shock is serious and instantaneous. Minimal water pressure in the house? Worse yet, unexpectedly no water in the home? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Genesee house – kaput, out, dry, nothing coming from any faucet or spigot – very likely you require a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps usually last 15 to 20 years. Their duration can be shorter or longer, based on the water being circulated and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Genesee. Their experienced team will troubleshoot your situation, and have your water back running within hours.
A well pump isn’t always the culprit of no water in the house. Occasionally an underground electrical wire breaks – a very repairable issue. Testing power connections is always the initial step undertaken by Kelly James Service.
If it is a well pump, though … then why? These pumps stop working for different reasons. Age is inevitable. Water with high iron content will significantly shorten pump life.
So will running water for hours in a row, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Reduced water pressure in a Genesee house is a different issue, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water flows from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for Genesee homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Reduced or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, minimal water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the issue only makes it worse, as pricey infrastructure can be harmed or stop working altogether.
The proactive measure – whether you have reduced water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water flowing again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud Genesee well pump service professionals!