We’re acclimated to having water readily available. Just start the faucet, or shower, or hose, and it pours forth. The mechanical magic barely registers. The water’s just always there.
So when something disrupts this reliability, the shock is serious and urgent. Minimal water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to worry.
Maybe yes … or no.
If you have no water pressure in your Glendale house – kaput, out, dry, nothing coming from any faucet or spigot – chances are you need a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps typically last 15 to 20 years. Their duration can be shorter or longer, depending on the water being circulated and how they’re used. Their well-being often ties in with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Glendale. Their experienced team will troubleshoot your situation, and have your water up and running within hours.
A well pump isn’t always the reason behind no water in the house. Occasionally an underground electrical wire breaks – a very repairable issue. Testing power connections is always the initial step undertaken by Kelly James Service.
If the issue is a well pump, though … then why? These pumps wear out for numerous reasons. Age is inevitable. Water with high iron content will significantly lessen pump life.
So will running water for hours at a time, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Glendale house is a different scenario, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a clogged iron filter – again, for Glendale homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Minimal or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain adequate pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, reduced water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the issue only makes it worse, as costly machinery can be damaged or quit working altogether.
The proactive measure – whether you have reduced water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water flowing again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Glendale well pump service professionals!