We’re acclimated to having water always available. Just turn on the faucet, or shower, or hose, and it spills out. The mechanical magic barely registers. The water’s just consistently there.
So when something interrupts this reliability, the shock is serious and urgent. Diminished water pressure in the house? Worse yet, suddenly no water in the house? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Fort Atkinson house – kaput, out, dry, nothing coming from any faucet or spigot – in all likelihood you require a new well pump. This pump, occasionally called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps on average work for 15 to 20 years. Their duration can be shorter or longer, depending on the water being pumped and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Fort Atkinson. Their knowledgeable professionals will troubleshoot your scenario, and have your water back running within hours.
A well pump isn’t always the culprit of no water in the house. Periodically an underground electrical wire breaks – a very fixable issue. Testing power connections is always the initial step taken by Kelly James Service.
If the issue is a well pump, though … then why? These pumps stop operating for numerous reasons. Age is unavoidable. Water with high iron content will significantly reduce pump life.
So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Reduced water pressure in a Fort Atkinson house is a different condition, albeit usually less serious. This condition appears in toilets filling slowly, or weak water flows from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a clogged iron filter – again, for Fort Atkinson homes with high iron content in water.
Otherwise, the problem usually links to the pressure tank. Reduced or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t maintain sufficient pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s health.
Frankly, reduced water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the situation only makes it worse, as pricey equipment can be harmed or break down entirely.
The proactive measure – whether you have low water pressure in a house, or none at all – is to reach out to Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water pouring again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Fort Atkinson well pump service professionals!