We’re used to having water always available. Just turn on the faucet, or shower, or hose, and it spills forth. The mechanical magic barely registers. The water’s just always there.
So when something disrupts this reliability, the shock is unmistakable and instantaneous. Minimal water pressure in the home? Worse yet, unexpectedly no water in the house? Yikes. Time to worry.
Maybe yes … or no.
If you have no water pressure in your Danville home – kaput, out, dry, nothing coming out of any faucet or spigot – in all likelihood you need a new well pump. This pump, often called a water pump, moves water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps on average last 15 to 20 years. Their lives can be shorter or longer, based on the water being pumped and how they’re used. Their well-being often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Danville. Their experienced team will diagnose your situation, and have your water running again within hours.
A well pump isn’t always the reason behind no water in the house. Sometimes an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the first step undertaken by Kelly James Service.
If it is a well pump, though … then why? These pumps quit working for many reasons. Age is unavoidable. Water with high iron content will significantly reduce pump life.
So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Low water pressure in a Danville home is a different problem, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem might be a clogged iron filter – again, for Danville homes with high iron content in water.
Otherwise, the problem usually links to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, reduced water pressure in a home is a headache. It’s a problem that doesn’t just fix itself, either. Ignoring the problem only makes it worse, as pricey mechanicals can be harmed or quit working altogether.
The proactive decision – whether you have low water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of providing water solutions, their team will get your water pouring again. It will be once again at your fingertips – precisely as you expect it to be. We are your proud Danville well pump service professionals!